Fuxtec FX-RM5170 Bedienungsanleitung Seite 50

ORIGINAL USER MANUAL FUXTEC FX-RM5170 / FX-RM5170eS rev03
Then pull carefully on the handle of the starter cable until you feel a slight resistance. Now pull the
starter rope with momentum to start the engine. With a cold start, you may need 2-3 attempts until
the engine runs.
Handle starter cable
To stop the engine again, release the handle with the engine cable. The engine stops, and the knife
turns a few more rounds until it stops completely.
If you have a model with an eStart, follow the same steps. Only press the start button on your mower
to start it. Please make sure that the battery is charged.
50