Selve commeo Control Betriebsanleitung Seite 35

Explanation of functions/terms used
5.1. Intermediate position 1
The intermediate position 1 is a free settable position which can be
called up via a double tap on the DOWN button.
Note: For a correct moving to the intermediate position 1 the runtime
of the construction must be set correctly!
Set intermediate position 1
Operation
>3 s
Drive
Move the drive to the upper end position
with the UP button.
Push the STOP button and then addition-
ally push the DOWN button.
Keep both pushed. After 3 seconds, the
programming run starts. Set the position
with the DOWN and UP buttons while
keeping the STOP button pushed.
Releasing the STOP button will save the
position.
35
EN
EN