Selve commeo Control Betriebsanleitung Seite 28

EN
Installation
4. Installation
Safety instructions
• Ensure that the controls are not installed and operated in
the vicinity of metal surfaces or magnetic fields. Metal
surfaces or panes of glass with a metallisation within the
Warning!
transmission path can reduce the range considerably.
• Risk of injury through an electric shock.
Warning!
• Terminal connections must be carried out by an autho-
rised electrician.
• If more than one motor is being controlled via the
commeo Control, the motors must be decoupled by relay
controls. The switched current of the device must be
observed at all times.
28