Parkside PERT 550 C6 Bedienungsanleitung Seite 9

Vibration emission value
Vibration total values (triaxial vector
sum) determined according to
EN 50636-2-91:
Main handle a :
h
Uncertainty K:
Auxiliary handle a
h
Uncertainty K:
WARNING!
m
Wear ear protection!
NOTE
The declared vibration total value
u
and the declared noise emission
value have been measured in
accordance with a standard test
method and may be used for
comparing one tool with another.
The declared total vibration
u
value and the declared noise
emission value may also be used
for a preliminary assessment of
exposure.
WARNING!
m
The vibration and noise emissions
u
during actual use of the power tool
can differ from the declared values
depending on the manner in which
the tool is used, especially what
kind of workpiece is processed.
It is necessary to identify safety
u
measures to protect the operator
that are based on an estimation of
exposure in the actual conditions
of use (taking account of all parts
of the operating cycle such as the
times when the tool is switched
off and when it is running idle in
addition to the trigger time).
8.2 m/s²
1.5 m/s²
: 3.4 m/s²
1.5 m/s²
General safety notes
General power tool safety warnings
WARNING!
m
Read all safety warnings,
u
instructions, illustrations and
this power tool. Failure to follow
all instructions listed below may
result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
Work area safety
1) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
2) Do not operate power tools in
explosive atmospheres, such as in
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
3) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
Electrical safety
1) Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of
electric shock.
GB/IE/NI 9