Parkside PERT 550 C6 Bedienungsanleitung Seite 15

NOTE
Observe local regulations
u
concerning noise protection.
˜
CAUTION! Risk of injury and
m
property damage!
Maintain a firm stand and hold the
u
product well with both hands at
a safe distance away from your
body.
Before switching on the product,
u
check that it does not touch any
objects.
After the product has been
u
switched off, the line spool
continues moving for some time.
Allow the line spool to come to a
complete stop.
Keep hands and feet at a safe
u
distance from the line spool
NOTE
For transport safety during
u
delivery, the cutting line is knotted
at the ends. The dual line auto-
feed system regulates the cutting
width during initial start-up and the
knotted ends are automatically cut
off by the line cutter
The product cannot be switched to
u
continuous operation.
Remove grass cuttings regularly
u
from the line spool
that cutting is not impaired.
E
1. Form a loop from the end of the
extension cord. Pass the loop
through the opening on the upper
handle and hook it into the strain
1 ] [
relief .
4 ] [
[ ]
.
[ ]
.
[ ]
to make sure
[ ]
2. Connect the product to the mains
supply.
3. Ensure your stance is stable and
hold the product tightly with both
hands. Do not allow the spool cap
to hit the floor.
4. Switching on: Press and hold the
on/off switch
[ 2 ]
5.
switch .
[ 2 ]
˜ Settings
Adjusting the auxiliary handle
You can adjust the auxiliary handle
to various positions. Adjust the auxiliary
handle so that the spool cap
slightly forward as you work.
Loosen the nut
auxiliary handle
position. Re-tighten the nut.
Adjusting the height
The telescopic tube
adjust the product to your individual
height.
Loosen the threaded bush
rotating towards . Adjust the
telescopic tube
length. Tighten the threaded bush by
rotating towards .
Adjusting the cutting angle
Changing the cutting angle allows you
to trim grass at places that are difficult
to reach, e.g. under benches or wall
offsets.
Press the push button
motor housing and tilt the telescopic
tube . There are 6 possible
[ 7 ]
settings.
.
Release the on/off
[
is tilted
[ ]
and adjust the
[ ]
to the desired
[ ]
allows you to
7 ] [
by
6 ] [
to the correct
[ 7 ]
on the
[ 8 ]
GB/IE/NI
[ ]
]
15