Clearing paired devices
Press and hold
button
2 seconds.
The memory in the headphones is cleared. After clearing the
paired memory, it will not automatically connect the device
you used before, need to pair again manually.
Putting on the headphones
The headphones can be adjusted to your head size, if necessary:
the speakers
are secured to the band
2
Adjust these to ensure optimal comfort.
Please note the marking "L" (= left) and "R" (= right) on the inside
of the band immediately above the speakers. Put on the headphones
so the control buttons are on the left.
Headphones button functions
for music playback
Start a playlist on your playback device. First turn the volume of
the playback device to minimum, then put on the headphones.
You can adjust the headphones volume with the control buttons.
Music is played back through the speakers
There are 4 control buttons. These control the following functions:
Button
Function
– Press and hold to switch the product on/off.
– Press once to play/stop music playback.
– Press once to increase the volume by one level.
One signal tones will sound when the maximum
volume has been reached.
– Press and hold approx. 2 seconds to skip to
the next track.
– Press once to reduce the volume by one level.
– One signal tone will sound when the minimum
volume has been reached.
– Press and hold approx. 2 seconds to jump to
the previous track.
– In paired mode (LED
every 5 seconds), press and hold for approx.
2 seconds to change to pairing mode to allow
another communication device for connection.
– In pairing mode (LED
alternatively), briefly press to connect to the
previous paired communication device again.
Headphones button functions as a
headset
You may also use the headphones for telephone calls when used
with a communication device which supports this function. If your
and
button for approx.
10
6
with a rail for this purpose.
1
.
2
flash white once
9
flash red/white
9
communication device supports the Bluetooth
will be able to use the following functions:
Function
Answer/end call
Ignore call
Increase volume
Reduce volume
End the current call and
answer call waiting*
Switch between two calls
(toggle)*
*These functions must be supported by your mobile service provider.
– When there is incoming call, the LED
once every 5 seconds.
– The ringer and the caller's voice are rendered through the
speakers
.
2
– Music playback is automatically paused when a call is received.
– The microphone
records your voice.
11
– Music continues after the call has been ended.
Note: No headset function while using Audio cable
Connecting the headphones
through Audio cable
Insert the Audio cable (3.5 mm)
and other 3.5 mm jack plug in to the 3.5 mm jack connection
8
socket of your playback device.
Start a playlist on your playback device. You can only adjust
the music volume on the playback device.
Note: Music playback via Audio cable takes priority over music
playback via Bluetooth
. Music playback from a Bluetooth
®
source is therefore interrupted once the Audio cable
into the 3.5mm jack socket
Voice control function with Siri/
Google Assistant
Activate Siri or Google Assistant on your mobile device.
iOS: Complete the Siri setup. Then, use Siri to activate this
product's voice control function.
Android: Open Google Assistant. Follow Google Assistant's
instructions to complete settings before using this product's
voice control function.
standard 5.3, you
®
Action
Briefly press the
button
6
Hold the
button
approx.
6
2 seconds.
Briefly Press
button
(one signal
5
tone will sound when the maximum
volume has been reached)
Briefly Press
button
(one signal
7
tone will sound when the minimum
volume has been reached)
Briefly press the
button
6
Hold the
button
approx.
6
2 seconds until it beeps.
will briefly flash white
9
.
12
into the 3.5mm jack socke
12
is plugged
12
.
8
GB/IE
®
17