Parkside Performance PDSSAP 20-Li D3 Bedienungsanleitung Und Originalbetriebsanleitung Seite 43

˜ R i
To nd the product in the PARKSIDE app,
the following requirements must be met:
The PARKSIDE app is installed on
o
your smartphone and Bluetooth
activated.
The following battery pack is inside
o
the product: PARKSIDE Performance
S PAPS 20 A or
PAPS 20 A .
This smart battery pack has already
been connected to the PARKSIDE
app.
The product communicates with the
PARKSIDE app via the smart battery
pack.
The smart battery pack is connected
o
to the PARKSIDE app.
˜ Troubleshooting
Problem
The product does
not start.
The performance
of the product is
poor.
The product works
with interruptions.
42 GB/IE
is
®
Possible cause
The battery pack
7 ] [
inserted.
The battery pack
7 ] [
discharged.
The on/o switch
[
defective.
The motor is defective.
Excessive pressure on the
product
Internal loose contact
The on/o switch
[
defective.
˜ Connecting the product to
the PARKSIDE app
1. Insert the smart battery pack
2. Press the on/o switch
ashes.
When the product is connected,
lights up continuously.
3. Open the PARKSIDE app.
The product is displayed in the list.
If the product does not appear in the
list, add the product manually.
Monitoring and controlling the product
1. Select the product from the list.
The overview page of the product is
displayed.
2. Select the desired setting on the
overview page.
Tap to select the help menu if you
are unsure.
A dialogue box with a description for
the relevant setting is displayed.
Solution
is not Insert the battery pack
"Inserting/removing the battery
pack" .
is Charge the battery pack
(see "Charging the battery
pack" .
Contact our Service Centre
is
]
see "Service" .
Apply appropriate pressure on
the product.
Contact our Service Centre
see "Service" .
is
]
.
7 ] [
.
[ ] 5 ] [
(see
7 ] [
7 ] [