Using The Vacuum Cleaner - Mpm Mod-70 Bedienungsanleitung

EN

USING THE VACUUM CLEANER

1. Make sure the vacuum cleaner is properly assembled and the ba琀琀ery is charged.
2. Connect the relevant appliance:
- mul琀椀-purpose electric brush with illumina琀椀on (4) - for all types of hard surfaces and carpets,
LEDs illuminate the surface to be cleaned for perfect vacuuming
- furniture/Vene琀椀an blind a琀琀achment (8) – dedicated to vacuuming roller blinds, lampshades,
mirrors and anywhere else where gentle vacuuming is a priority, the brush length can be adjusted
to suit the vacuuming condi琀椀ons
- crevice a琀琀achment (6) – vacuuming of corners, spaces under the furniture and anywhere where
access to free use of other accessories is limited.
Depending on the needs, connect the equipment to the suc琀椀on pipe (3) or motor unit (2).
1. Start the vacuum cleaner with a switch (昀椀g. 2). The vacuum cleaner will operate in the AUTO mode.
2. In order to switch to one of the opera琀椀ng modes (AUTO, MAX or ECO), touch the "papillary line"
icon.
3. A昀琀er the vacuuming is 昀椀nished, switch o昀昀 the vacuum cleaner with a switch (昀椀g. 5).
Fig. 5
motor speed
ba琀琀ery charge
opera琀椀ng mode
The vacuum cleaner is provided with a 昀氀exible aluminium pipe in order to get to hard-to-
reach areas.
1. Place the vacuum cleaner on the 昀氀oor, holding the motor module handle (昀椀g. 6) with one hand.
2. Press the key located in the rear part of the aluminium pipe with your other hand. The pipe will
bend automa琀椀cally which will facilitate the vacuuming of hard-to-reach places, e.g. 昀氀oor under
the couch.
3. In order to fold back the pipe, raise the vacuum cleaner. The aluminium pipe will lock itself auto-
ma琀椀cally in the straight posi琀椀on.
34
MOD-70_instrukcja_v02.indd 34 MOD-70_instrukcja_v02.indd 34
touch the icon to
2
change the opera琀椀ng
mode
dus琀椀ng indicator
roller lock indicator
vacuum cleaner on/
1
o昀昀 switch
AUTO
ECO
MAX
29.11.2023 10:00:50 29.11.2023 10:00:50