Clamping The Wheel - Fasep Rase.3030. Variant Betriebsanleitung

9.4. CLAMPING THE WHEEL

Only use the lifter pedals when loading and unloading the wheel.
Do not press these pedals during any other procedures!
- Load the wheel onto the wheel lifter (Fig. 16).
- Press the pedal to lift the wheel
- Manually lay the wheel onto the turntable and lower the lifter by releasing pedal 16.
- When positioning the
wheel on the turntable, also
make sure that the movable
pin, situated radially on the
turntable, is centred cor-
rectly in one of the fastener
bolt holes (Fig. 16a - 16b).
124
WARNING
1
"ML" VERSION
3
"AL" VERSION
16a
2
16
16b
User's manual