VEVOR RC-9001 Bedienungsanleitung Seite 6

Service
Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power tool is maintained .
Drain Cleaner Safety Warnings
1. Maintain labels and nameplates on the tool. These carry important safety
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
2. Wear ANSI-approved safety impact eye goggles and heavy duty LEATHER
work gloves when using the Drain Cleaner. Never grasp a rotating cable with a
rag or cloth glove. Using personal safety devices reduce the risk for injury. Safety
impact eye goggles and heavy work gloves are available from Harbor Freight
Tools.
3. Avoid unintentional starting.
Prepare to begin work before turning on the tool.
4. Do not force the Drain Cleaner. This tool will do the work better and safer at
the speed and capacity for which it was designed.
5. Maintain a safe working environment. Keep the work area well lit. Make
sure there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use a power tool in
areas near flammable chemicals, dusts, and vapors
6. Unplug the Drain Cleaner from its electrical outlet before performing any
inspection, maintenance, or cleaning procedures. 7. Do not leave the Drain
Cleaner unattended while running. Turn power off if you have to leave the
Drain Cleaner.
8. Do not allow the cutter to stop turning while the machine is running. This
can over stress the cable and may cause twisting, kinking or breaking of the cable.
Twisting, kinking or breaking cable may cause striking or crushing injuries.
9. Keep gloved hand on the cable whenever the machine is running. This
provides better control of the cable and helps prevent twisting, kinking and
breaking of the cable. Twisting, kinking or breaking cable may cause striking or
crushing injuries
10. Before each use, check all nuts, bolts, and screws for tightness.
Vibration during operation may cause these to loosen.
11. Avoid electrical shock. Do not operate the Drain Cleaner if sitting in
standing water, and if the operator is in standing water. Keep extension cord off
the ground and away from water. Water increases the risk of electric shock.
- 5 -