VEVOR RC-9001 Bedienungsanleitung Seite 20

Follow operating instructions for your model explicitly.
Since drains likely contain hazardous chemicals or bacteria, wear appropriate
protective equipment, such as:
• ANSI-approved splash-resistant safety goggles and respirator under face shield.
• Latex, rubber or other liquid barrier gloves under heavy-duty LEATHER work
gloves. Do not use a glove you are not currently wearing or a rag to hold the
rotating cable. Cloth materials can get wrapped around the moving cable, leading
to serious personal injury. Before use, inspect gloves to be sure they are free of
defects or loose sections that could get caught in Drain Cleaner.
• Rubber soled, non-slip shoes to help prevent slipping and electric shock.
1. After making sure the Rotation Switch is in the "Forward" position, Tension
Knob has been retightened, and the Power Feed Lever is in the down (forward)
position, press the Foot Switch to start feeding the cable further into the drain.
Make sure you can operate the Foot Switch while having at least one hand on
the cable at all times. Also make sure the Rotation Switch on top of the Drain
Cleaner and Power Feed Lever are within reach.
WARNING! Only one person should operate the cable feed and the Foot Switch.
Do not operate the Drain Cleaner with one person controlling the cable and
another person controlling the Foot Switch. This can cause the cable to kink, twist,
and break, which can also lead to
serious personal injury.
2. If the cable becomes lodged (for
example: in a narrow part of the
drain, in a drain trap, etc.), put the
Power Feed Lever in
the"neutral"position and allow
the cable to try and work itself past
the obstruction.
If cable still won't pass obstruction,
release pressure from the Foot
Switch and use sharp downward
thrusts to try and pass obstruction.
Once cable is past, put the Power
Feed Lever in the down (forward)
position, press the Foot Switch, and
continue feeding.
- 19 -