VEVOR RC-9001 Bedienungsanleitung Seite 5

5. Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations .
6. Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts
7. Only use safety equipment that has been approved by an appropriate
standards agency.
Unapproved safety equipment may not provide adequate protection. Eye
protection must be ANSI-approved and breathing protection must be NIOSH
approved for the specific hazards in the work area.
Power tool use and care
1. Do not force the power tool. Use the correct power tool for your
application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
2. Do not use the power tool if the
Any power tool that cannot be controlled with the switch is dangerous and must
be repaired .
3. Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool
accidentally .
4. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands of untrained users.
5. Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that
tool's operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
7 . Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the work
to be performed.
Use of the power tool for operations different from those intended could result in a
hazardous situation.
switch does not turn it on and off.
- 4 -
may affect the power