Honda EM25 Bedienungsanleitung Seite 42

4.SPARK PLUG SERVICE
RECOMMENDED SPARK PLUG: BPR6ES (NGK)
To ensure proper engine operation, the spark plug must be properly
gapped and free of deposits.
1.Remove the spark plug cap.
2.Clean any dirt from around the spark plug base.
3.Use a spark plug wrench to remove the spark plug.
SPARK PLUG WRENCH
4.Visually inspect the spark plug. Discard it if the insulator is cracked,
chipped, or fouled. Clean the spark plug with a wire brush if it is to
be reused.
5.Measure the plug gap with a feeler gauge.
Correct as necessary by carefully bending the side electrode.
The gap should be:
0.7–0.8 mm (0.028–0.031 in)
SIDE ELECTRODE
W20EPR-U (DENSO)
SPARK PLUG CAP
0.7–0.8 mm
(0.028–0.031 in)
SEALING WASHER
39