Herunterladen Diese Seite drucken

Parkside PAKS 20-Li E5 Bedienungsanleitung Und Originalbetriebsanleitung Seite 52

20 v akku-kettensäge
Vorschau ausblenden Andere Handbücher für PAKS 20-Li E5:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
l ays ear ear mu s.
 
The noise produced by the product
can damage your hearing.
Wear robust protective gloves made
 
of a durable material, e.g. leather.
Wear a dust mask when sawing dry
 
wood. Saw dust may be produced.
˜ Storage and transportation
S itch o the product before moving
 
it anywhere, even short distances.
Engage the chain brake and put on
the chain guard.
Always use the chain guard for
 
transportation and storage ( ig.  ).
Protect the product during transport
 
(also in vehicles) against tipping over
to prevent damage or injuries.
Carry the product by the front handle
 
only. Make sure the guide bar is
facing to the rear, away from your
body ( ig.  ).
Clean and maintain the product
 
before storage.
Store the product in a secure and dry
 
location. Secure the product against
unauthorised access.
˜ Environmental safety
Work only in daylight.
 
Do not work in inopportune weather
 
conditions, such as rain or wind.
This will lead to an increased risk of
accidents.
Keep your work area clean and tidy.
 
Keep children, other people and
 
animals at a distance before and
during the work. Distractions can
cause you to lose control.
Before starting work, ensure that no
 
people, animals or valuable property
are inside the danger zone.
Do not work in the vicinity of wire
 
fences or areas with loose old wire.
50 GB/IE
˜ Vibration and noise
reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and low-
noise operating modes as well as wear
personal protective equipment.
Take the following points into account
to minimise the vibration and noise
exposure risks:
Only use power tools that are in
 
perfect condition.
Maintain and clean the power tool
 
regularly.
Adapt your working method to the
 
power tool.
Do not overload the power tool.
 
Have the power tool checked if
 
necessary.
S itch o the po er tool hen it is
 
not in use.
˜ Residual risks
Even if you use this power tool in
compliance with the regulations, there
are still remaining risks. The following
risks may occur due to the type and
design of the power tool:
Damage caused to your health
 
resulting from hand/arm vibrations if
the power tool is used over a longer
period of time or if it is not properly
used and maintained.
Injuries and damage to property due
 
to broken accessory tools or the
sudden impact of hidden objects
during use.
Burns and cuts if insert tools are
 
touched directly after use and/or with
bare skin.

Werbung

loading

Diese Anleitung auch für:

465837 2404