Troubleshooting - Victron energy Centaur Charger 12/20 Bedienungsanleitung

TROUBLESHOOTING

Problem
Charger does not function
The battery does not get
fully charged
The battery is being
overcharged
Possible cause
The mains is not ok
Input or output fuses are
defective
A bad battery connection
The battery select switch
is in the wrong setting
Battery capacity to large
The battery select switch
is in the wrong setting
A single cell in battery is
defective
Too small battery
Solution
Measure mains
Return product to
your dealer
Check battery
connection
Select correct
battery type
(see Fig1)
Make sure charger
capacity matches
battery
Select correct
battery type
(see Fig1)
Replace battery
Consult your battery
supplier
5