2N IP style Bedienungsanleitung Seite 3

Device Configuration
Configuration takes place typically
Alternatively, configuration
2N" Access Commander software
The device is factory-set to DHCP ON. DHCP settings
Can be switched directly on the display
switching to the hidden menu
Wait until the end of the introductory
the display after starting/restarting
moment the home screen appears
place your finger in the top left corner
for approx. 5 s.
The IP address Of the device
the hidden menu. This can also be ascertained
the 2N' Network Scanner tool
downloaded from www.2n.cz
Technical Parameters
Basic properties:
made of tempered glass and aluminium
• 10" capacitive touchscreen
technology with resolution
camera with infrared
streaming of up to 5 Mpix
integrated combined
tamper switch to detect
the device
IP65 protection
• 1K 08
dimensions: 170 (w)
o x 40 mm (d) for surface
o x 22 mm (d) for
Access control options:
combined RFID card
MHz (optionally secure
numeric touchpad: numeric
2N" Mobile Key application:
smartphone which supports
technology
Interface:
Power Supply: 12 V
(802.3at)
LAN: 10/100BASE-TX
Maintenance - Cleaning
The surface will become dirty
Use a piece of soft cloth moistened
clean the device.
You are recommended to follow
while cleaning:
Use suitable products designed
optical devices or screens,
Clean the device in dry weather
water evaporate quickly. We recommend
Caution
Always use the product
designed and manufactured
herewith.
Any use of the product that is in contradiction
with the instructions provided
malfunction, damage or destruction
Any use or connection of the product
included herein shall be
manufacturer shall not be liable for any consequences
arisen as a result Of such
Be careful while handling
manufacturer shall not be liable for any personal injury
or property damage associated
3
2N TELEKOMUNIKACE a.s. hereby
2014/53/El_J and Directive
via a Web interface.
is possible using
or the My2N service.
Of the unit after
in the following manner:
animation on
the device. The
(after approx. 20 s),
of the display
will also be shown in
using
which can be freely
display with TFT LCD
Of 800 x 1280
illumination and support for
reader
unauthorized opening Of
x 355 (h) mm
mounting
flush mounting
reader: 125 kHz and 13.56
version)
PIN code
access using a
NFC and Bluetooth
% / 4 A DC or PoE+
s Auto-MDIX, RJ-45
during use of the device.
with clean water to
the principles below
for cleaning glasses,
etc. to clean the display.
in order to make waste
you to use IT
for the purpose it was
for, in compliance
herein may result in
of the product.
other than those
considered undue and the
misconduct.
the product; the
with the device.
declares that the 2NV IP Style device
2011/65/ELJ. Refer to www.2n.cz
If the address is 0.0.0.0, then the device
IP address from the DHCP server
(DHCP OFF) has to be used. If DHCP OFF is set, the
device static address is 192.168.1.100.
Enter the IP address Of the device shown
browser. Accept the safety warnings
as your acceptance is not in contradiction
of your device. The factory login data are: username:
admin and password: 2n.
Once logged in, you can start configuring
via the web interface. Detailed
configuration is provided by the Configuration
for 2N IP intercoms which is available
a direct link is available on the
configuration interface.
• Recommended cabling:
Passive switch: make and
V / 1 A AC/DC
Active switch output: 12 V / 0.6 A DC
Supported protocols: SIP2.O,
SMTP, SNMP, TR069, 802.1x,
TFTP, HTTP, HTTPS, Syslog, ONVIF
Audio properties
2 built-in microphones
Amplifier: 2 x 4 W
Speaker: 2 x 4 W / 4 Q
LINE OUT: 1 VRMS / 600
Full duplex audio
Codecs: L16 / 16kHz, G.711, G.729, G.722
Protocols: RTP/RTSP/SRTP
Video properties
Frame rate: up to 30 frames/s
Focal length: 1.7 mm
Codecs: H.264, MJPEG
• Protocols: RTP/RTSP/SRTP/HTTP
Camera functions: yes, ONVIF v2.4 profile
compatible
cleaning wipes.
To disinfect the surface of the device
and viruses (anti-covid) to maintain
conditions of critical surfaces
recommend that you use Zoono
Surface Sanitiser Spray.
Do not use aggressive detergents
strong disinfectants). Alcohol,
soda) based cleaners must not
The warranty does not apply
and failures arisen as a result
contradiction herewith). The manufacturer
liable for damage caused by theft within
that is accessible after the attached
switched on. The product is not designed
protection device except when used in combination
with a standard lock, which
This manual is a brief version
available at wiki.2n.cz. In the event of any discrepancy
between the two aforementioned
version shall prevail.
type complies with the requirements
for the full wording of the Declaration
did not get the
and static IP address
into any web
of some browsers
to a safe use
your device
information about
manual
at wiki.2n.cz,
start screen of the
Cat-Se or higher
break contact, max. 30
SIPS, DHCP opt. 66,
RTSP, RTR SRTP,
Q
S
against bacteria
the hygiene
and touch points, we
- Microbe Shield
(such as abrasives or
peroxide and lye (caustic
be used.
to the product defects
of improper mounting (in
is neither
an area
electric lock is
as a burglar
has the security function.
Of the online User Manual
versions, the online
of Directive
of Conformity.