Unfolding The Rollator; The Push Handles - Excel Mobility Excel 3-Motion Bedienungsanleitung

5.1.2

Unfolding the rollator

To unfold the rollator, follow these steps:
• First, fold the front and rear wheels back into position. Simply rotate the front wheels back into their normal
position and push gently until the grey locking mechanism clicks into place.
• Unlock the rear wheels by pulling the grey locking mechanism towards the wheel and simultaneously rotating
the frame tube back into its normal position. Ensure the frame tube clicks securely into place.
• While the rollator is upright on its wheels, press down gently on the seat tubes to unfold the rollator. You will
hear a confirming click once the rollator is fully unfolded (photos 9 and 10).
• Replace the storage bag if it has been removed, and the rollator is ready for use.
Photo 9
5.2

The push handles

The push handles of the rollator are height-adjustable. Adjusting the handles to the correct height for your body
is essential. To determine the proper height, stand between the handles of the Excel 3-Motion. Your wrists should
align with the correct height for the handles. To adjust the handle height, follow these steps:
• Press the silver button located on the side of the rollator frame (photos 11 and 12).
• While pressing the silver button, pull the push handle upwards or push it downwards to adjust it to the desired
height.
• Once the handle aligns with your wrist (photos 13 and 14), it is set to the correct position.
• Release the button to lock the handle into place. You will hear a click confirming that the handle is secure.
Photo 11
Warning
Ensure both handles are set to the same height. This ensures proper body symmetry and posture.
CLICK!
Photo 10
Photo 12 Photo 13 Photo 14
EN
35