Parkside Performance PPAKS 40-Li A1 Originalbetriebsanleitung Seite 39

– Blade bar length . 35.0 cm (350 mm)
– Cutting length ..... 28.5 cm (285 mm)
Saw chain ............ CL14346TL (Trilink)
– Chain pitch ............... 9.525 mm (⅜")
– Number of driving elements ........ 46
– Drive link thickness 1.1 mm (0.043")
Chain sprocket pitch ...9.525 mm (⅜")
–Number of teeth (chain sprocket) ... 7
Temperature ......................max. 50 °C
– Operation ....................... -20 - 50 °C
– Storage ..............................0 - 45 °C
Sound pressure level (L
...............................92.6 dB; K
Sound power level (L
– Guaranteed ....................... 100.4 dB
– Measured ..... 97.8 dB; K
Vibration (a )
h
– Front handle . 4.37 m/s²; K=1.5 m/s²
– Rear handle .. 3.72 m/s²; K=1.5 m/s²
Type of battery .......................... Li-Ion
PARKSIDE Performance Smart
battery Smart PAPS 204 A1/
Smart PAPS 208 A1
– Operating frequency/Frequency
band .....................2400 - 2483.5 MHz
– transmitted power ............≤ 20 dBm
Levels of noise and vibration were de-
termined according to the standards
and regulations in the declaration of
conformity.
The specified total vibration value
was determined according to the fol-
lowing standard: ISO 22867:2021
The specified noise emission val-
ues were determined in accord-
ance with the following standard:
ISO 22868:2021
The values have been determined ac-
cording to a standardised test pro-
cedure and can be used to compare
one tool with another. The specified
total vibration value and the stated
specified noise emission value can
)
pA
=3 dB
pA
)
WA
=2.73 dB
WA
also be used for a provisional assess-
ment of the load.
WARNING! The vibration and
noise emissions may deviate from the
specified values during actual use of
the device, depending on how the
device is being used. Safety meas-
ures for the protection of the operator
are to be determined that are based
on an estimate of the actual vibration
load under the real operating condi-
tions (for this, all parts of the oper-
ating cycle are to be taken into ac-
count, for example, times in which the
device is turned off, and those dur-
ing which it is turned on but running
without a load).
X 20 V TEAM
The device is part of the
X 20 V TEAM series and can be
operated with batteries of the
X 20 V TEAM series. Batteries of
the X 20 V TEAM series may only
be charged using chargers of the
X 20 V TEAM series.
We recommend that you oper-
ate this appliance with the fol-
lowing batteries only: PAP 20 A1,
PAP 20 A2, PAP 20 A3, PAP 20 B1,
PAP 20 B3, Smart PAPS 204 A1,
Smart PAPS 208 A1
Use of the device with the fol-
lowing batteries is prohibited:
Smart PAPS 2012 A1
We recommend charging these bat-
teries with the following chargers:
PLG 20 A1, PLG 20 A2, PLG 20 A3,
PLG 20 A4, PLG 20 C1, PLG 20 C3,
PDSLG 20 A1, PDSLG 20 B1,
PLG 201 A1, Smart PLGS 2012 A1
Rechargeable battery and charger
technical data: See separate manual.
GB MT
39