Storage; Parkside App - Parkside Performance Ppaks 40-Li A1 Originalbetriebsanleitung

GB MT
• Sharpening angle (25°)
• Front angle (10°)
• Sharpening depth (0,6 mm)
• Round file diameter (4,8 mm (3/
16"))
WARNING! Risk of accident! Devi-
ations from the dimensions of the cut-
ting edge geometry can lead to an in-
creased tendency of kickback by the
machine.
Tools and aids required
• Round file
• Flat file
Procedure
1. Switch off the tool and remove the
batteries.
2. Ensure that the saw chain is
tightly tensioned to enable correct
sharpening.
3. Only sharpen from the inside out.
Guide the round file from the in-
side of the cutting tooth to the out-
side. Lift off the file when you pull
it back.
4. Sharpen the teeth on one side
first. Then turn the saw chain over
and sharpen the teeth on the other
side.
5. Check the length of the cutting
links. After sharpening, all the cut-
ting links must have the same
length and width.
6. After every third sharpening, check
the sharpening depth (depth
gauge) and re-file the height using
a flat file. The depth gauge should
be set back by approx. 0,6 mm
from the cutting tooth.
7. After resetting, round off the depth
gauge slightly towards the front.

Storage

• Clean the device prior to storage.
• Attach the encasing (22).
58
• Empty the oil tank prior to longer
periods of non-use. Dispose of
waste oil environmentally correctly
(Disposal/environmental protection,
p. 60).
There may still be oil residues
within hoses and in the device
that could leak out during stor-
age. Place the device on a suitable
base/oil pan for storage.
• Store the device in a dry and dust-
proof location and out of reach of
children.

PARKSIDE app

The PARKSIDE app lets you monitor
the device and control certain func-
tions. The functions may change with
updates to the app and firmware. For
more information on the PARKSIDE
app, see the instructions for the smart
battery.
Requirements
To find the device in the PARKSIDE
app, the following requirements must
be met:
• The PARKSIDE app is installed on
your smartphone and Bluetooth®
is activated.
• The following battery is inside the
device: PARKSIDE Performance
Smart battery PAPS 204 A1
or PAPS 208 A1. This battery
is already connected to the
PARKSIDE app.
The device communicates with the
app via the battery.
Connecting the device to the
PARKSIDE app
1. Insert the smart batteries (17).
2. Press the on/off button (34).
The "Connected" display (33)
flashes three times. When the
device is connected, the "Connec-