Ready2Connect Led; Parkside App; Requirements; Connect The Appliance To The Parkside App - Parkside Performance Ppha 20-Li B2 Originalbetriebsanleitung

Ready2Connect LED

If smart battery functions are supported,
the Ready2Connect LED
following manner:
Connect the battery pack
LED flashes 3 times
Connect to the app
LED stays on
Not connected to the app
LED stays off
Tool in update mode
LED flashes continuously
Tool update successful
The LED flashes for 5 seconds
Tool update failed
LED flashes rapidly alternately

PARKSIDE APP

This appliance supports
advanced functions when
using special smart batteries.
For more information, refer to
the operating instructions for
the smart battery.
You can use the PARKSIDE app to monitor
the appliance and control certain functions.
The functions may change with app and
firmware updates. Further information on
the PARKSIDE app can be found in the
operating instructions for the smart battery.

Requirements

To find the appliance in the PARKSIDE app,
the following requirements must be met:
The PARKSIDE app is installed on your
■
smartphone and Bluetooth
The following battery is installed in the
■
appliance:
PARKSIDE Performance Smart battery
PAPS 204 A1 or PAPS 208 A1. This bat-
tery has already been connected to the
PARKSIDE app.
The appliance communicates with the
app via the battery.
lights up in the
is activated.
®
Connect the appliance to the
PARKSIDE app
1) Insert the smart batterie.
2) Press the ON/OFF button
2Connect LED
When the appliance is connected, the
LED lights up continuously.
3) Open the PARKSIDE app.
4) Your devices . The appliance is
displayed in the list. If the appliance is
not displayed in the list, add the appli-
ance manually.
Monitoring and controlling the
appliance
1) Your devices .
2) Select the appliance from the list.
The overview page of the appliance is
displayed.
3) Select the desired setting on the
overview page.
If you are unsure, select Help.
A dialogue window with a description of
the respective setting is displayed.

Privacy Policy

The complete Privacy Policy can be found
under the "More" tab in the "Privacy
Policy" field.

Delete device and data from the app

1) In the Your devices tab, select
the appliance you want to remove and
whose data you wish to delete.
2) Tap the appliance in the list and drag it
to the left.
3) Confirm with "OK" or click on the
recycle bin .
The appliance is deleted.

Information about the app?

1) Further information and setting options
can be found under the
. The Ready
flashes three times.
"More" tab.
|
GB / IE
11