Parkside Performance PPHA 20-Li B2 Originalbetriebsanleitung Seite 12

Dusts can be produced while working
■
that are hazardous to health, inflamma-
ble or explosive. Wear a dust mask and
use a suitable dust/chip extractor. Some
dusts are carcinogenic.
When working for extended periods of
■
time on wood and, in particular, materi-
als that produce dust which is hazard-
ous to health, connect the appliance to
an appropriate external dust extraction
appliance. Do not use the power planer
if the battery is damaged. Damaged
cables increase the risk of electric
shock.
Do not rest your hands next to or in
■
front of the appliance and the area being
worked. Otherwise, there is a risk of
injury if you slip.
In the event of danger, remove the mains
■
plug from the socket immediately.
Always remove the plug from the power
■
socket in event of danger, during work
breaks, when working on the appliance
(e.g. when changing planing blade).
Always route the power cord towards
■
the rear, away from the appliance.
Use only sharp planing blades.
■
Do not soak the materials or the area
■
to be processed with liquids containing
solvents.
Avoid all contact with rotating parts.
■
Never use the appliance for purposes
■
other than those for which it was
designed, and only use original parts/
accessories.
Hold the appliance firmly while working.
■
Ensure that your stance is secure and
stable.
The appliance must always be kept
■
clean, dry and free from oil or grease.
Before use
Charging the battery pack
CAUTION!
Always unplug the appliance before
►
you remove the battery pack from
or connect the battery pack to the
charger.
WARNING!
Observe the safety instructions and
►
the instructions on charging and cor-
rect use given in the operating instruc-
tions for your
and charger.
A detailed description of the charging
process and further information can
be found in these separate operating
instructions.
NOTE
Ideally, charge the battery completely
►
before use. You can charge the lith-
ium-ion battery at any time without
shortening its service life. Interrupting
the charging process does not dam-
age the battery.
Never charge the battery pack if the
►
ambient temperature is below 10°C or
above 40°C. If a lithium-ion battery is
to be stored for an extended period,
the charge level should be checked
regularly. The optimum charge level is
between 50% and 80%. The storage
climate should be cool and dry and
the ambient temperature should be
between 0°C and 50°C.
The recommended ambient tempera-
►
ture range for using tools and batteries
is between –5°C and 50°C.
If necessary, remove the battery from
♦
the appliance.
Insert the battery pack
♦
charger .
series battery
into the
|
7
GB / IE