Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Color Macros:
#
Value
1
016 - 023
2
024 - 031
3
032 - 039
4
040 - 047
5
048 - 055
6
056 - 063
7
064 - 071
8
072 - 079
9
080 - 087
10
088 - 095
11
096 - 103
12
104 - 111
13
112 - 119
14
120 - 127
15
128 - 135
12-Channel-Mode
Channel:
1
2
3
4
5
6
7
8
9
10
11
12
EUROLITE IR-8 remote control
The device must be activated for remote control. For this, under menu item Iron press the ENTER button to
confirm activation.
Colors
R
G
B
UV
RG
GB
BUV
RUV
GUV
RB
RGB
GBUV
RGUV
RBUV
RGBUV
Value:
000 - 255
Red 1 (0 – 100%)
000 - 255
Green 1 (0 – 100%)
Blue 1 (0 – 100%)
000 - 255
000 - 255
UV 1 (0 – 100%)
000 - 255
Red 2 (0 – 100%)
Green 2 (0 – 100%)
000 - 255
Blue 2 (0 – 100%)
000 - 255
000 - 255
UV 2 (0 – 100%)
000 - 255
Red 3 (0 – 100%)
000 - 255
Green 3 (0 – 100%)
Blue 3 (0 – 100%)
000 - 255
UV 3 (0 – 100%)
000 - 255
1
When actuating a button, always hold the remote control in
the direction of the sensor. There must be visual connection
between the remote control and the sensor.
2
The remote control is supplied with a battery inserted. An
insulating foil between the battery and the battery contacts
prevents the battery from being discharged during storage.
Prior to the first operation remove the foil from the battery
support on the rear side of the remote
control. Otherwise, operation of the remote
control is not possible.
3
If the range of the remote control decreases
(10 meters as a maximum), replace the battery. For this
purpose, on the rear side of the remote control press the
small bar with the groove to the right and at the same time
remove the battery support. For operation, one 3 V button cell
type CR 2025 is required. When inserting, pay attention that
the positive pole of the button cell shows upwards in the
support.
26/28
Function:
LED 1, 2, 3 & 4
LED 5, 6, 7, & 8
LED 9, 10, 11 & 12
00098844, Version 1.1
Werbung
Inhaltsverzeichnis
