SPARX SHARPENER COMMERCIAL Bedienungsanleitung Seite 32

7
MAINTENANCE
1
LIFT THE HEAD UNIT
Slide the latches on each side of the base into the unlocked
position. Lift the Head Unit into the upright position.
2
ATTACH THE CLEANING HOSE
Attach the Cleaning Hose with Brush (A) into the back inside of
the Sparx Sharpener Commercial Base (B), turn the Automated
Vacuum Switch to "On" and throughly Vacuum the top, sides and
around the Head Unit and Base.
MAINTENANCE
28
B
A
3
REMOVE THE HOSE
Remove the cleaning hose with brush and turn the Automated
Switch back to Auto.
4
LOWER THE HEAD UNIT
Slide the triggers toward you and lower the Head Unit back into
the home position and slide the Lock Latches (A) on each side of
the base into the locked postion.
A