SPARX SHARPENER COMMERCIAL Bedienungsanleitung Seite 14

3
SETUP
INSTALLING THE COMMERCIAL
SHARPENER BASE
To watch the How-To video, visit
1
REMOVE THE THUMBNUTS
Remove each of the Thumb Nuts (A) that are installed with the
Sharpener Head Unit.
2
LOWER THE HEAD UNIT ON TO BASE
Gently place the Sharpener Head Unit down on to the top of the
Sparx Sharpener 3 Commercial Base.
SETUP
10
sparxhockey.com/howto
A
3
TIGHTEN THUMBNUTS
Install each of the Thumb Nuts (A) into the Sharpener Head Unit
and the Sparx Sharpener 3 Commercial Base.
4
LOCK THE BASE
Lower the Head Unit down into the home position and slide the
latches on each side of the base into the lock postion (A).
A
A