SPARX SHARPENER COMMERCIAL Bedienungsanleitung Seite 23

5
OPERATION
We recommend inserting the skate into the Skate Clamp with the
toe pointing to the right. For most skate blades, this orientation
allows for the greatest flexibility in Grinding Ring height
adjustment. It is, however, acceptable to insert the skate with the
toe facing in either direction.
LOADING A SKATE
*For loading goalie skates and figure skates see the end of this section.
To watch the How-To video, visit
1
LOAD THE SKATE
Press and hold down the Clamp Lever
With the skate toe pointing right and the laces tucked into the
skate, set the skate into the
blade holder rest on top of the clamps. Center the skate blade
in the Skate Clamps. Release the
2
CLOSE THE SLOT COVERS
Move each Slot Cover (A) in toward the skate until they touch
the blade holder.
A
sparxhockey.com/howto-pro
to open the Skate Clamp.
Skate Clamp slot letting the plastic
Clamp Lever.
A
OPERATION
19