Conrad TE988 Bedienungsanleitung Seite 35

8. Language function
Select the language in which the OSD is to be displayed.
9. Tool function
Use the first symbol (R with arrow) to reset the values changed by you to the values
preset in the monitor.
The "OSD" symbol serves to set the time period during which the OSD is to remain
visible on the screen.
This "timer" is reset whenever you actuate a key. A time from 5 to 240 seconds can
be selected. It is practical to select a setting of approx. 10 seconds, which allows you
to select the individual functions without having to exit the OSD via the menu item
"Exit"; instead, you only have to wait for 10 seconds until the OSD disappears auto-
matically.
The "Degauss" function (the crossed-out magnet) can eliminate slight colour defects
which might be due e.g. to transport.
The power-save function can be activated/deactivated via the "star" symbol.
The last but one item allows you to select the level of the video input signal. Normal-
ly, you should not change the level of 0.7 V. However, with a few rare graphic adap-
30
5. Fonction parallélogramme et tilt
On peut corriger ici une déformation de l'image en parallélogramme. En outre, il est
possible de tourner légèrement l'image.
6. Fonction couleurs RGB - température
On peut ici régler ce qu'on appelle la température de couleur. Trois valeurs (6500°K,
7500°K et 9300°K) sont pré-réglées. Il existe en outre un réglage définissable par l'u-
tilisateur.
7. Position OSD
En cas de nécessité, on peut modifier sous ce point du menu la position du On-Scre-
en-Display. Réglez la position OSD selon vos désirs.
47