Pkm WT8+5-TC-AD Bedienungsanleitung Seite 165

POSSIBLE CAUSE(S)
S
OME DETERGENT REMAIN IN THE CONTAINER
1. Accumulated, damp detergent.
1. Heavily-contaminated laundry.
2. Wrong amount of detergent.
1. The shipping bolts are still in the
appliance.
2. The appliance is not installed and /
or adjusted properly.
3. Foreign objects are in the appliance. 3. Remove any foreign objects.
4. Load is too low.
5. The laundry has accumulated at one
side of the drum.
6. Laundry which cannot be spaced is
in the drum.
D
RYING LEVEL HAS NOT BEEN REACHED
1. Selected programme is unsuitable.
2. Load volume is too big.
T
HE DRYING PERIOD ENDS SHORTLY AFTER THE START OF THE
1. Not enough clothes in the appliance.
Clothes are too dry for the selected
programme.
If the appliance has a malfunction not listed in the table above, or if you have
checked all items in the above table but the problem still exists, please contact the
aftersales service.
MALFUNCTION
U
NSATISFACTORY WASHING RESULTS
A
BNORMAL NOISE
PROGRAMME
~
MEASURE(S)
1. Clean the container.
 Use liquid detergents.
 Use detergents suitable for washers
only.
1. Select a suitable programme.
2. Choose the proper amount of
detergent (look at the information on
the packaging of your detergent).
/ S
EVERE VIBRATIONS
1. Remove the shipping bolts.
2. Install and / or adjust the appliance
properly.
4. Load the appliance properly.
5. Space the laundry.
6. Remove the pieces which cannot be
spaced.
/
DRYING
1. Select a drying programme suitable
for the laundry to be dried.
2. Reduce the load.
.
1. Select a drying programme suitable
for the laundry to be dried.
~
165
.
.
-
TIME IS TOO LONG
.