Pkm WT8+5-TC-AD Bedienungsanleitung Seite 107

4. Ensure that the rubber washer
connector. Attach the curved end of the water
inlet hose to the inlet valve of the washing
machine / washer-dryer (s. fig. on the right / 1).
Tighten the water inlet hose firmly (clockwise) to
avoid leakage (s. fig. on the right / 2). Tighten the
hose by hand; do not use pliers or similar tools.
NOTICE! Do not overtighten the water inlet hose. Overtightening of the
water inlet hose can damage the valves.
NOTICE! After the installation of the water supply and wastewater disposal
as well as before the first operation, all water hose connections – even on
the appliance itself – must be checked for leakage. The manufacturer is
not liable for any damage caused by improper installation.
2.5.1 AquaStop
A S
QUA TOP HOSE
(AQUASTOP) is activated that interrupts the water supply to the appliance. In such
a case, the control glass (X) turns red (s. fig. below). Replace the water supply hose
immediately.
X
Do not immerse the A
Depending on model.
40
Depending on model.
41
: If an internal pipe or hose is damaged, a shut-off system
41
S
QUA TOP HOSE
is in the valve
40
C
ONTROL GLASS
in water as it contains an electric valve.
~ ~
107