Pkm WT8+5-TC-AD Bedienungsanleitung Seite 144

H
1. The appliance must be switched on. You can deactivate the acoustic signals while
the appliance is set or during operation.
2. Press and hold the « S
T » -
OUCH BUTTON
3. The corresponding operational status indicator goes on: « S
».
55
4. The acoustic signals are deactivated (except the acoustic signals in the case of
error messages).
1. The appliance must be switched on. You can deactivate the acoustic signals while
the appliance is set or during operation.
2. Press and hold the « S
T » -
OUCH BUTTON
3. The corresponding operational status indicator goes off: « S
».
56
4. The acoustic signals are activated.
5.4 Door Lock
WARNUNG! If you stop a running programme, the temperature of the
water, the laundry and the drum can be very high. Be very careful while
removing the laundry. RISK OF SCALDING! RISK OF BURNS!
 The appliance is equipped with an automatic door lock.
 After programme start, the door lock is activated automatically and the
operational status indicator of the door lock «
The door is always locked while a programme is running. It is not possible to
open the door while the door lock indicator is on. To open the door by force
can damage the appliance seriously.
Depending on model.
55
Depending on model.
56
OW TO DEACTIVATE THE ACOUSTIC SIGNALS
(Ger.: Drehzahl) » -
PIN
simultaneously for at least 3 seconds.
H
OW TO ACTIVATE THE ACOUSTIC SIGNALS
(Ger.: Drehzahl) » -
PIN
simultaneously for at least 3 seconds.
BUTTON
BUTTON
» goes on. The door is locked.
~ ~
144
and the « O
IGNALS DEACTIVATED
and the « O
IGNALS DEACTIVATED
NE
NE