Dreame BotW10 Benutzerhandbuch Seite 5

Batteries and Charging

Do not use any third party battery or self-wash base. Use only with RCS3 supply
unit.

Do not attempt to disassemble, repair or modify the battery or self-wash base on
your own.

Do not place the self-wash base near a heat source.

Do not use a wet cloth or wet hands to wipe or clean the base's charging contacts.

Do not improperly dispose of old batteries. Unneeded batteries should be discarded
at an appropriate recycling facility.

This product contains batteries that can only be replaced by qualified technicians
or after-sales service.

If the power cord becomes damaged or broken, stop using it immediately and
contact after-sales service.

Make sure the robot is turned off when being transported and kept is its original
packaging if possible.

If the robot will not be used for an extended period of time, fully charge it, then
turn it off and store it in a cool, dry place. Recharge the robot at least once every 3
months to avoid over-discharging the battery.
Laser Distance Sensor

The laser distance sensor complies with the IEC 60825-1:2014 standard for Class 1
laser products and does not generate dangerous laser radiation.
Product Overview
Accessories
Cleaning Tool
Mop Pad (x2)
Power Cord
Side Brush
5