Dreame BotW10 Benutzerhandbuch Seite 15

Note:

Make sure that the robot is fully charged before using it. Do not manually move the
robot when it is cleaning.

If the battery gets low while cleaning, the robot returns to the base and resumes
cleaning after charging its battery. The Resume Cleaning function must be enabled
on the app in advance.
Cleaning Mode
After the robot is turned on, it cleans each room by cleaning along the edges and walls
first and then cleaning in an S-shaped pattern. The robot automatically returns to the base
to charge its battery after cleaning.
Pause/Sleep
When the robot is cleaning, briefly press any button on the robot or the
base to pause the robot.
If the robot pauses for more than 10 minutes, it automatically enters the sleep mode, and
the power indicator and charging indicator stop glowing. Press any button on the robot or
base or tap on the app to wake up the robot.
Stop Cleaning
When the robot is paused or on standby, press and hold
the spot cleaning mode. In this mode, the robot cleans a square-shaped area of 1.5 x 1.5
meters around it and returns to its starting point once the spot cleaning is completed.
Additional App Functions
A map must be built before using the preceding functions.
Follow the instructions on the app to use more functions.
The app software is upgrading, and the actual app user interface may be different from
the statements in this manual. Please follow the instructions based on the current app
version.
Mopping Function
1. Attach the mop pad.
button for 3 seconds to enable
15
button on the