Dreame BotW10 Benutzerhandbuch Seite 12

Install the side brush
Note: Install the side brush until it clicks into place.
Place the base against the wall and charge the robot

Install the base in as open a location as possible with a good Wi-Fi signal.

Insert the power cord into the base and plug it into the socket.

Place the robot onto the base, and the robot will turn on automatically and start
charging.

It is recommended to fully charge the robot before the first use. After the robot is
fully charged, the status indicator illuminates white for 10 minutes and then lights
down.
Note:

Remove any objects that are closer than 1.5m from the front and 0.5m from either
side of the base.

Make sure that no objects might block the signalling area.

To prevent water stains from wetting wood floors or carpets, the self-wash base is
recommended to e placed on the tile floors or marble floors.
Within the Best
Wi-Fi Range
12