Dreame BotW10 Benutzerhandbuch Seite 14

Reset Wi-Fi
Simultaneously press and hold the
"Waiting for the network configuration." Once the Wi-Fi indicator is blinking slowly, the Wi-
Fi has been reset.
Note: If the robot cannot connect to your phone, Reset the Wi-Fi network and try again.
How to Use
Fast Mapping
Do not attach the mop pad. Place the robot on the base, and the robot turns on
automatically.
The first time you use the robot, build a map as instructed on the app. Then, cleaning.
After the robot returns to the base, a map is built and saved automatically.
Turn On/Off
Press and hold the
is permanently on, the robot is on standby. To run off the robot, press and hold the
button for 3 seconds when the robot is not moving.
Start Cleaning
Press briefly the
and
button for 3 seconds to turn on the robot. Once the power indicator
and button on the base, and the robot starts cleaning.
button until you hear a voice prompt saying,
Wi-Fi Indicator

Blinking slowly: To be connected

Blinking quickly: Connecting

On: Connected
14