Technical Data - EINHELL TE-MS 2112 L Originalbetriebsanleitung

4. Technical data

AC motor: ........................................ 230 V ~ 50Hz
Power: .........................................1400 W S6 20%
Idle speed n : .......................................5000 min
0
Carbide saw blade: ............ø 210 x ø 30 x 2.8 mm
Number of teeth: .............................................. 48
Swiveling range: ............................. -47° / 0°/ +47°
Miter cut to the left: ..................................0° to 45°
Saw width at 90°: ............................. 120 x 60 mm
Saw width at 45°: ............................... 83 x 60 mm
Saw width at 2 x 45°
(double miter cut left): ........................ 80 x 34 mm
Max. cutting height: .................................... 60mm
Max. workpiece depth: ............................. 120mm
Weight: ............................................ approx. 10 kg
Laser class: ....................................................... 2
Wavelength of laser: ................................ 650 nm
Laser output: ............................................ ≤ 1 mW
Minimum workpiece size: Only ever cut workpie-
ces which are big enough to clamp securely with
the clamping device – minimum length 160 mm.
Operating mode S6 20%: Continuous operation
with idling (cycle time 10 minutes). To ensure that
the motor does not become excessively hot, it
may only be operated for 20% of the cycle at the
specifi ed rating and must then be allowed to idle
for 80% of the cycle.
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 61029.
L sound pressure level ..................... 93,8 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ..................... 106,8 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 61029.
Vibration emission value a
K uncertainty = 1.5 m/s
= 4.4 m/s
2
h
2
GB
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
-1
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
- 25 -