Proper Use; Technical Data - EINHELL GP-EA 18/150 Li BL-Solo Originalbetriebsanleitung

3. Proper use

Depending on the attachment, the machine can
be used for the following:
•
Drilling holes in the earth.
•
Mixing liquid and powdery building materials
such as mortar, plaster and similar subs-
tances. A selection of stirrers with different
mixing actions is available to suit the consis-
tency and quantity of the material in question.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Motor power supply: ............................... 18 V DC
Idling speed ...........................................125 min
Mount: ......................................................... M14
Max. drilling/stirring diameter: .... ............ 150 mm
Weight: .......................................................5.7 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
L sound pressure level ..................... 79.4 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ....................... 90.4 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Vibration emission value a
K uncertainty = 1.5 m/s
Anl_GE_EA_18_150_Li_BL_SPK13.indb 15 Anl_GE_EA_18_150_Li_BL_SPK13.indb 15
-1
= 5.54 m/s
2
h
2
- 15 -
GB
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
04.06.2021 10:39:02 04.06.2021 10:39:02