Operation - Eberth Sc2-Rb12 Bedienungsanleitung

• Slide the pipe to be bent between the die and the rollers of the pipe bender.
• Tighten the stop valve of the lifting cylinder with the slotted end of the pump rod in a
clockwise direction.
• Insert the handle into the pump sleeve and operate it by pumping up and down to lift
the siphon and bend the pipe.
• As soon as the desired bending angle is reached, remove the handle from the lifter.
• Loosen the stop valve by turning the screw one full turn counterclockwise. This loosens
the pipe and makes it easy to remove.
EN V. 1.1

Operation

Role
Role
Fig. 5
1 1