Scope Of Delivery; Intended Use - Eberth Sc2-Rb12 Bedienungsanleitung

Always read through the operating instructions.
The operator must read and understand the operating instructions to ensure safe handling.
Even operators with experience of the appliance must read and understand the operating
instructions.
Inadequately informed operators can endanger themselves and others through improper
use. Keep the operating instructions within easy reach.
The operating, maintenance and cleaning personnel must read the operating instructions.
If the device is passed on to a third party, also hand over the operating instructions.

Scope of delivery

The latest technical changes may differ from the explanations and information described
here deviate from the illustrations.
Included in the scope of delivery:
• 1x Eberth tube bending machine
• 8x cast iron pressure pieces (* 2 inch pipe bender is supplied with 6 pressure pieces)
• 1x operating instructions

Intended use

This pipe bending machine is specially designed for bending water pipes, rigid pipes and
high wall thickness galvanized pipes used in commercial applications and similar pipe
types. When bending thin-walled pipes (pipe or conduit), it is recommended that the pipe
is filled with sand before bending and that the ends are securely sealed. The pipe bending
machine is only suitable for bending pipes in an upright position.
3
EN V. 1.1