Storage; Disposal; Troubleshooting; Error Codes - Zipper Zi-Rwm827-Lcd Betriebsanleitung

16.3

Storage

Store the cleaned machine in a dry, frost-proof and lockable place when not in use. Disconnect the
machine from the power supply. Make sure that unauthorised persons and especially children do
not have access to the machine.
Improper storage can damage and destroy important components. Only store packed
or already unpacked parts under the intended ambient conditions!
16.4

Disposal

Observe the national waste disposal regulations. Never dispose of the
machine, machine components or operating equipment in the residual waste.
If necessary, contact your local authorities for information regarding available
disposal options.
If you purchase a new machine or equivalent equipment from your specialist
dealer, he is obliged in certain countries to dispose of your old machine
properly.
17

TROUBLESHOOTING

Danger due to electrical voltage!
Handling the machine with connected power supply may result in serious injury or
death.
 Disconnect the machine from the power supply before starting work to
eliminate defects!
Many possible sources of error can be eliminated in advance if the machine is properly connected
to the power supply.
If you are unable to carry out the necessary repairs properly and/or do not have the required
training, always consult a specialist to solve the problem.
17.1

Error codes

Error Code
ZIPPER MASCHINEN GmbH
W A R N I N G
Possible cause
Machine does not run
Shaft spins, but pick up board does
not provide a signal
No wheel or not correctly mounted
wheel
Position of pick-up board
No enough pressure in wheel
Wheel distortion
Pick up board problem
Computer board problem
Micro switch problem
Computer board problem
Power board problem
www.Zipper-Maschinen.at
N O T E
Check power supply
Check pick-up/computer board
Check/change position of pick-up board
Mount wheel correct
Check/change position of pick-up board
Add proper pressure in wheel
Check wheel
Check/change pick-up board
Check/change computer board
Check/change micro switch
Check/change computer board
Check/change power board
TROUBLESHOOTING
Solution
ZI-RWM827-LCD
47