Zipper ZI-RWM827-LCD Betriebsanleitung Seite 32

ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
3. Hood
• Position the two hood parts (1) to each other as
shown
• Fix it with M6x20 screws and M6 nuts (2)
• Place the hood on the hood rod as shown
• Fix it with M6x45 screws and M6 nuts (2)
4. Holder
• Turn the holder (1) into the threads on the side of the
machine
• Store the measuring gauge and centring cones (also
possible in the trays) when not in use
5. Screen
• Mount the screen holder (1) as shown
• Mount the screen (2) on the screen bracket as
shown
• Plug the power supply cable (3) into the socket
• Insert the VGA plug (4) into the interface and
tighten the securing screws
6. Threaded shaft
• Fix the threaded shaft (2) to the main shaft (1) with
the screw (3)
7. Centering cone
• Slide a cone (1) and the clamping cover (2) onto the
threaded shaft (4) and loosely tighten the quick
release nut (3).
ASSEMBLY
32
ZI-RWM827-LCD