Rim Diameter Gauge; Rim Width Gauge - Zipper Zi-Rwm827-Lcd Betriebsanleitung

15.3.3

Rim diameter gauge

To self-calibrate the machine, proceed as follows:
1. Mount a wheel (described in chapter "Mounting the wheel")
2. Switch the machine on
Press key .
3.
Press key and
4.
5.
15.3.4

Rim width gauge

Switch the machine on
Press key .
1.
Press key and
2.
Width compensation:
If there is still a deviation in the rim width gauge after self-calibration, rim width gauge
compensation is needed.
4. Mount a wheel with a known rim width (described in chapter "Mounting the wheel")
ZIPPER MASCHINEN GmbH
to select
to select
www.Zipper-Maschinen.at
Press key
Press key
the wheel diameter
Operation
Press key
Move gauge head to touch the
rim edge and hold.
Press key
Operation
Press key
Put down the hood
Operation
OPERATION
to enter
and to input
to confirm.
to confirm.
Calibration
finished.
to enter
Kalibrierung
abgeschlossen
36
ZI-RWM827-LCD