Dynamic Mode - Zipper Zi-Rwm827-Lcd Betriebsanleitung

15.5.1

Dynamic mode

• Put down the hood => measuring cycle starts
• The unbalance values remain on the screen after finishing the measuring cycle.
• Press key may check the real unbalance value under threshold
ZIPPER MASCHINEN GmbH
Input values a (rim distance), b (rim width) and
d (rim diameter)
•
Rim distance:
•
•
•
Rim diameter:
•
Manual input (if needed):
•
Rim width:
•
•
Manual input (if needed):
•
•
•
•
•
www.Zipper-Maschinen.at
Switch the machine on
Move gauge head (1) to touch the rim edge for appr.
4s.
Value is saved automatically
Return the gauge head to position „0"
The value measured automatically with a-value
Press key and
Put down the hood as shown
Value is saved automatically
Move caliper (1) to touch the rim edge
Read off the rim width on scale (2)
Press key and
All indicators of inside unbalance position lights up
green
Add the counterweight on the inside 12 o'clock
position
OPERATION
or to input the values
or to input the value
ZI-RWM827-LCD
40