Alu-S Split Function Mode - Zipper Zi-Rwm827-Lcd Betriebsanleitung

15.5.5

ALU-S split function mode

NOTE:
Only ALU-S mode can use this function. Operator must be experienced.
1.
2.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
• All indicators of inside unbalance
position lights up green
Add the counterweight on the inside 9
•
o'clock position
Press key or
•
position outside automatically.
All indicators of outside unbalance
•
position lights up green
Add the counterweight on the outside 9
•
o'clock position
Check the result:
• Put down the hood. => measuring cycle
starts.
If 0 0 is displayed, the result is OK
•
If the result is not satisfactory, repeat the
•
balancing process
In ALU – S mode press key
Pres key and
of spokes
Press key to confirm
OPERATION
find the unbalance
to input the numbers
ZI-RWM827-LCD
43