Inventum IMC4535RT Bedienungsanleitung Seite 31

USING THE START DELAY FUNCTION
You can use the start delay function to make sure your meal is ready at a pre-set time. The appliance starts automatically.
Note:
Make sure the clock is set before you start using the start delay function. See section Setting the clock.
Note:
You cannot use the kitchen timer when defrosting and when using the automatic programmes with an active start
delay function.
1. Press the start delay button. The start delay function indicator lights up in the display and the hour value flashes.
2. Press the up/down button or move the slider to adjust the hour value.
3. Press the start delay button once more. The minute value flashes in the display.
4. Press the up/down button or move the slider to adjust the minute value.
5. Press the start delay button to save the settings.
6. Press the function button to select the required function (e.g. oven, etc.).
7. Press the up/down button or move the slider to select the temperature.
8. Press the clock/temperature button to set the time.
9. Press the start/pause button to finish. The start delay function indicator flashes in the display.
When the delay time has passed, a sound signal can be heard and the appliance starts.
USING THE PLACEMENT LEVELS
The appliance has 5 placement levels to ensure that you can partly remove the
oven rack or baking tray without tilting. This means that you can safely remove the
dish from the appliance and the oven rack or baking tray will not fall out of the
appliance by accident.
Careful:
For reasons of safety, place the baking tray on one of the placement levels.
Do not place the baking tray on the bottom of the appliance.
1. Use the guide racks to place the oven rack (A) or baking tray (B) correctly in the
appliance.
2. Check that the accessories have been fully placed in the appliance and do not
make contact with the door.
USING THE OVEN FUNCTION
See the section below for an overview of available oven functions.
1. Press the function button. The oven indicator shows the conventional function.
2. Press the function button once more to select the required oven function.
The oven indicator shows the selected function.
3. Press the up/down button or move the slider to select the temperature.
4. Press the clock/temperature button and set the cooking time with the up/down button or slider.
5. Press the start/pause button to start the appliance.
6. When the cooking time has finished, a sound signal can be heard. [End] is shown in the display to indicate that
the programme has been completed. After 5 minutes the appliance switches back to the standby position.
Note:
When you open the door of the appliance during cooking, you must press the start/pause button to resume
the preparation.
31
• Nederlands
KG KG
A
B
31
English •