Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4
prior to first use
PREPARING FOR OPERATION
1. Clean the appliance and the accessories. Use warm water and a mild cleaning agent.
2. Thoroughly rinse the appliance and accessories with water.
3. Dry the appliance and the accessories.
4. Activate the oven function for 60 minutes at a temperature of 250°C to remove any production residues such as oil and
prevent unpleasant smells. See section Using the oven function.
Warning:
Check that the space is properly ventilated.
5. Allow the appliance to cool down.
6. Clean the appliance again. Use warm water and a mild cleaning agent.
7. Thoroughly rinse the appliance with water.
8. Dry the appliance
9. Place the guide racks in accordance with the sections below.
1
B
1
D
2
E
3
A
C
A
PLACING THE HOOKS FOR THE GUIDE RACKS
1. Find the hooks for the back (A) and front (B). (Figure 1)
2. Place the hook (C) in the top opening (D).
3. Place the hook in the bottom opening (E).
4. Push the hook down.
5. Repeat the procedure for the other hooks.
PLACING THE GUIDE RACKS
Note:
The procedure shows the installation for the guide rack on the right side of the appliance. The procedure for the left
side is the same, but the hooks are mirrored.
1. Find the hooks for the left (A) and right side (B). (Figure 2)
2. Carefully push the guide rack (C) in the hook (D). (Figure 3)
3. Push the rack to the back of the appliance.
4. Push the rack down.
5. Place the clamp bushes (E).
2
1
D
2
E
3
C
B
3
1
A
B
3
D
D
C
C
2
D
C
English
E
29
•
Werbung
