Load Test - Autool Bt960 Bedienungsanleitung

Load test

Start the engine, wait for 15 seconds, then press the [
start the detection. The tester will display the charging system
detection results, as shown in the figure.
20
10
Battery Volt.
Min Voltage
Max Voltage
After entering the load testing program, the tester will prompt
"Please turn on all electrical devices, start the engine, wait for 15
seconds! Press <OK> to begin detection," as shown in the figure.
Lead Acid
After turning on all electrical devices, start the engine, and after
waiting for 15 seconds, press the [
tester will display the maximum load testing results, as shown in
the figure.
Charging System
14.41V
V
V
Lithium Cranking
Test Battery Test Test
Charging Load Volt.
Test Test measure
Current
Languages Help
measure
15
Charging System
20
10
Battery Volt. 14.42V
Min Voltage 14.40V
Max Voltage 14.42V
Normal Voltage
>>Please turn on all
electric.
>>Please start the engine
and wait 15 seconds.
>>Press <OK> to continue!
] key to begin detection. The
] key to