Data Printing; Printing Paper Installation; Printing Operation - Autool Bt960 Bedienungsanleitung

DATA PRINTING

Printing
paper
installation
Printing
operation
AUTOOL
2024-04-10 13:30
VIN:
Battery testing result
Voltage Set value
=12.43V =500A(CCA)
SOC: 71%
● After completing each function test, you can press the [
print key on the test results interface to enter the printing
settings interface.
●
Select the time setting to configure the print time, and press
the [ ] key to enter the test vehicle settings interface.
●
Press the [
pressing the [
working, and the test result data will be printed on the paper.
NOTE:
The printer cannot be powered by dry batteries, lithium batter-
ies, or a tested battery with a voltage below 8V. It requires an
external TYPE-C connection to a 5V/1A power source or a
battery voltage greater than 8V detected through the battery
testing leads.
Current value
277A(CCA)
] key to enter the test vehicle model. After
] key, the built-in printer of the tester will start
20 24 . 01 . 19
(YY YY. MM. DD)
03 : 24 : 45
(HH:MM:SS)
<OK>
TIME SETTING
17
VEHICLE IDENTIFI
<Ecs> <OK>
]