Cranking Test; Charging Test - Autool Bt960 Bedienungsanleitung

Cranking
test
Charging
test
After entering the startup testing program, the tester will display
"Startup System Detection" and prompt "Start the engine, wait for
15 seconds!" as shown in the figure.
Lead Acid
Charging
Current
measure
Start the engine, and after waiting for 15 seconds, the tester will
display the startup system detection results, as shown in the figure.
Current voltage:
Minimum voltage:
Start
Min Value
After entering the charging test program, the tester will prompt
"Start the engine, wait for 15 seconds! Press <OK> to begin
detection," as shown in the figure.
Lead Acid
Charging
Current
measure
Lithium Cranking
Test Battery Test Test
Load Volt.
Test Test measure
Languages Help
Starter System Test
10.44 V
9.85 V
> 9.6 V
6 s
Lithium Cranking
Test Battery Test Test
Load Volt.
Test Test measure
Languages Help
14
Starter System Test
Current voltage:
12.69 V
Minimum voltage:
Start 12.69 V
Min Value > 9.6 V
>>Please start the engine
and wait 15 seconds.
Starter System Test
Current voltage:
14.41 V
Minimum voltage:
Start 9.85 V
Min Value > 9.6 V
OK
>>Please start the engine
and wait 15 seconds.
>>Press <OK> to continue!