Volt. Measure; Current Measure - Autool Bt960 Bedienungsanleitung

Volt.
measure
Current
measure
Maximum Load Testing
20
10
Battery Volt.
Min Voltage
After entering the voltage measurement program, the tester will
display "Voltage Waveform Display" and prompt "Press <OK> to
start" / "Press <OK> to stop."
Lead Acid Lithium
Test Battery Test
Charging Load
Test Test
Current
Languages
measure
After entering the current measurement program, the tester will
display "Current Value," with instructions to "Press and hold [
to zero the reading, and press [
Lead Acid
Charging
Current
measure
14.42V
V
OSCILLOSCOPE
20
Cranking
Test
10
Volt.
measure
RMS Voltage:
Min Voltage:
Max Voltage:
Help
Press <OK> to start
Lithium Cranking
Test Battery Test Test
Load Volt.
Test Test measure
Languages Help
16
Maximum Load Testing
20
10
Battery Volt. 14.42V
Min Voltage 14.41V
Normal Voltage
20ms OSCILLOSCOPE
20
10
14.42 V RMS Voltage:
14.40 V Min Voltage:
14.42 V Max Voltage:
Press <OK> to stop
] to hold," as shown in the figure.
Ampere(DC)
0.000A
< >Zero <OK>Hold
20ms
14.42 V
14.40 V
14.42 V
]