Mask Versions; Marking/Certification; Marking; Certification - Msa 3S-Basis Plus Gebrauchsanleitung

Figure 1 Overview full face mask
2.1

Mask Versions

MSA 3S-Basis Plus
2.2

Marking/Certification

2.2.1

Marking

The mask is marked on the outer face blank as shown in
Figure 2 Marking of mask body
2.2.2

Certification

The mask conforms to the Regulation (EU) 2016/425. It is a full face mask in accordance with
harmonised/designated standard EN 136:1998 CL2 for the extended temperature range from -30 °C to +60 °C.
Regulation (EU) 2016/425
DEKRA Testing and Certification GmbH, Adlerstraße 29, 5307 Bochum, Germany, Notified body
number: 0158
The Declaration of Conformity can be found under the following link: https://MSAsafety.com/DoC.
GB
• Standard version with polycarbonate lens
Figure 2
EN 136 CL2
:
0158
1 Face blank
2 Head strap
3 Buckle
4 Lens
5 Connector with inhalation and exhalation valve
:
1 Mask Version
2 Part Number
3 Marking [date code, serial number]
4 CE-marking with notified body number
5 EN standard, class
2 Description
5