Werbung
EN
30
INSTALLING FILTERS
Istalling grease mesh filters
To install filters for the following four steps:
•
Angle the filter into the slots at the back of the hood.
•
Push the button on the handle of the filter.
•
Release the handle once the filter fits into a resting position.
•
Repeat to install all filters.
Installing carbon filter
1.
Before installing or replacing the carbon filters, disconnect the mains power
to the unit.
2.
Press the filter lock and remove the mesh filter.
3.
Turn the carbon filter on both sides of the motor anti-clockwise. Replace the
carbon filters with the new carbon filters.
4.
Place the mesh filter.
5.
Connect the power supply to the wall socket.
Notes
•
Make sure the filter is securely locked. Otherwise, it would loosen and cause
danger.
•
When activated carbon filter attached, the suction power will be lowered.
Werbung
